Comments on: CCC adds elevation changes and current elevation to the floor level maps https://empoweredchristchurch.co.nz/ccc-adds-elevation-changes-and-current-elevation-to-the-floor-level-maps/ Campaigning for fair settlements and accountability in Christchurch Tue, 09 Dec 2014 01:10:50 +0000 hourly 1 https://wordpress.org/?v=4.1.25 By: Hugo https://empoweredchristchurch.co.nz/ccc-adds-elevation-changes-and-current-elevation-to-the-floor-level-maps/#comment-263 Tue, 30 Sep 2014 21:49:45 +0000 https://empoweredchristchurch.co.nz/?p=477#comment-263 Hi Vivienne,
I am very concerned about lack of transparency as new subdivisions are taking place there and the land is suspect.
It would be best to call council and ask them to explain why this information is not inclusive.

You should be able to find some information here.
https://canterburygeotechnicaldatabase.projectorbit.com/Maps/EQC/TT-LiquefactionVulnerabilityStudy.htm
There are LiDAR maps of pre and post earthquake elevation on this site.

This map below shows predicted settlement if we have what is called ULS event. Peak Ground Acceleration of 0.35 PGA.
https://canterburygeotechnicaldatabase.projectorbit.com/Maps/EQC/LVS/Figure%20I17.pdf

Let me know if you need any assistance with this.

]]> By: Vivienne Watts https://empoweredchristchurch.co.nz/ccc-adds-elevation-changes-and-current-elevation-to-the-floor-level-maps/#comment-260 Mon, 29 Sep 2014 22:13:29 +0000 https://empoweredchristchurch.co.nz/?p=477#comment-260 Hi Hugo, can you tell me why the data is only available for a certain area of Christchurch? It appears when I search the Cera/CCC Land sinking/rising map data only appears up to Barrington Street in the South West.

It appears that they have no data for our area in Hoon Hay and further South, did they assume we did not sink/rise?

This is new growth area for Christchurch, kind of scary if no one knows whether the land was susceptible to bouncing in earth quakes.

In particular we are close to the end of Darfield Fault and the Port Hills Fault, with both the Halswell and Heathcote rivers starting out this way along with the run off from the Port Hills (ponding area).

Vivienne Watts

]]> By: Hugo https://empoweredchristchurch.co.nz/ccc-adds-elevation-changes-and-current-elevation-to-the-floor-level-maps/#comment-87 Fri, 27 Jun 2014 22:51:05 +0000 https://empoweredchristchurch.co.nz/?p=477#comment-87 Hi Bryce, Try installing silverlight from Microsoft. This sounds like a plugin failure.
http://www.microsoft.com/silverlight/
I hope this helps. Otherwise let me know and I can help you with some screenshots of your property.
Hugo

]]> By: Bryce https://empoweredchristchurch.co.nz/ccc-adds-elevation-changes-and-current-elevation-to-the-floor-level-maps/#comment-85 Thu, 26 Jun 2014 21:41:11 +0000 https://empoweredchristchurch.co.nz/?p=477#comment-85 Hi Hugo, Can you give an actual link to the floor levels layers additions- all I can get is a screen shot when I click on anything that looks like a link or hyperlink from here. Have tried going through the council’s site and links but when I click on “accept” for the disclaimer box everything comes to a screaming halt, it almost appears that performing this action disconnects rather than connects you to the page, I have firelight 5.1 but still won’t connect to the sight- thanks Bryce

]]>